Before you send an RFQ
Having these ready gets you a faster, more accurate quote.
Applications
Module frames
Extruded frames fitted to the PV module itself — protecting the laminate edge and standardising how the module mounts.
Module protection
Frame profiles that seal and protect the laminate edge against handling and weather.
Standardised mounting
Corner keys and mounting holes machined to the module maker's spec.
Clamp compatibility
Frame sections sized for standard mid- and end-clamps.
Mounting / racking systems
Structural rails and supports that carry the array on a roof or on the ground — sized for the site's wind and snow load.
Rooftop mounting
Rails and clamps for pitched and flat roof arrays.
Ground-mount racking
Structural rails and supports for ground-mounted arrays at a set tilt angle.
Load-bearing structure
Sections sized for the project's wind and snow load.
Specifications
Module frames
| Alloy grades | 6005 / 6063 |
| Temper | T5 / T6 |
| Section | to module frame size |
| Corner / holes | machined to your drawing |
| Dimensional tolerance | to EN 12020 / ±0.1 mm |
| Surface finish | Anodized — clear or black |
Mounting / racking systems
| Alloy grades | 6005 / 6082 |
| Temper | T6 |
| Rail section | to your racking system |
| Wind / snow load | to project spec / [value] |
| Dimensional tolerance | to EN 12020 / ±0.1 mm |
| Surface finish | Mill / Anodized |
From enquiry to production
Secondary machining and finishing are handled as in-house services — CNC & machining · Finishing.
Quality & certification
- — Material traceability by heat and lot
- — Dimensional inspection reports
- — Salt-spray & coating-thickness testing
- — Third-party certification on request
Certificate numbers and copies are available on request.
Frequently asked questions
Module frames or mounting/racking — do you supply both?
Yes, both from one supplier. Module frames fit the PV laminate itself; mounting/racking is the structure that carries the array. Tell us which line you need — or both — and we quote each against its own spec.
For module frames, do you supply finished frames or just the profile?
We can supply bare profiles or frames machined for corner keys and mounting holes, ready to assemble. Tell us the module drawing and whether you want cut-and-machined sets or plain lengths.
For mounting/racking, how do you handle wind and snow load?
The rail section and wall are sized to the project's wind and snow load. Share the site load case and array layout and we confirm the section and alloy — load figures are set to your project spec, not a generic number.
Clear or black anodize for module frames?
Both are available. Black anodize is common on modules for appearance; clear anodize is a durable standard finish. We can match the shade to your module maker's specification.